Subscribe to download
Small Modular Ship Set - Free to Use

Small Modular Ship Set - Free to Use
[PLEASE USE THE LARGE WORKBENCH]

This Ship set uses 19 blocks wide.

Prebuilt Sections:
-----------------------
4 Bows
4 Sterns (2 Dual Propeller/2 Single Propeller)
1 Customizable Mid-Section
4 Bridges
4 Utility Racks
3 Funnels
3 Masts
Medium/Large/Fluid Jet Diesel/Electric Engines
Fuel & Stabilizer Pack
Controllers
New Decor
and Custom Color Board
------------------------

Both Bow sections have Pivots below the waterline to help with buoyancy installed already.
Control Surface Stabilizers are installed below the Mid-Section already

[Guide to building with Modular Hulls]
https://test-steamproxy.haloskins.io/sharedfiles/filedetails/?id=3205598500

[Building]

1. Copy the section you want to use and paste it into a new creation.
2. Align using the BOTTOM of the hull.
3. The middle section is meant to be tapered to your desired length.
4. Merge Sections together.
5. Add Fuel and Stabilizer Pack directly under the center of mass.

[IMPORTANT]

1. Fuel and Stabilizer Pack needs to align with the bottom of the hull. You will delete the existing blocks with the Fuel and Stabilizer pack as meant to.
2. Align the Blue cross under your center of mass after you connect the sections you want. This will help keep your center of mass but also provide the most stability.

[LOGIC]

1. Connect your "A/D" to the rudders for steering.
2. The Linear Speed Sensor needs to be installed in the furthest rear wall facing forward. (Control Surface Stabilizer)
3. The throttle needs to be connected to both the Engine throttles and the Electric Engine throttle.
4. Place one Tilt Sensor at the highest point on the ship, facing left. (Both the PID in F&S Pack under the Process variable and the Altair Stabilizer(CS Stabilizer)). All three masts have a Tilt Sensor preinstalled.


Any credits are appreciated but not necessary

RIS Soldier